Simucube PSU holding brackets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets are designed to hold the 300W Simucube 2 Pro PSU. Designed to be fastened with screws to a flat surface.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 62
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Brackets are designed to hold the 230V 300W Simucube 2 Pro PSU. Designed to be fastened with screws to a flat surface. I use them to mount my PSU to a wooden simrig. The model's height is designed to slightly compress the foam rubber feet that are on the PSU to ensure a snug fit without rattling noise. Be aware of this when mounting it on anything other than a flat surface.
There are 2 different brackets to accomodate different cables.
I printed them upside-down with PETG on a prusa i3 MK3S+ with PEI printbed. No supports are needed this way.
Since I printed them I made a small adjustment since the 48V cable did not fit through it's opening due to the ferrite core of the cable being too big. I filed away a bit of material on the print but since I updated the model this should not be necessary.
Not a very common item but maybe somebody will benefit from it.