Silicone Wire Spool Holder {REMIX}
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix Silicone Wire Spool Holder da Djambo
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 1068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix di Silicone Wire Spool Holder da Djambo per poter cambiare lo spool senza dover svitare le viti di tenuta.
Ogni spool si cambia sollevando la parte superiore del box.
Stampa
Per chi dovesse aver già stampato l'originale bisogna che stampi solo la due parti del box.
Ho usato brim e supporti
Montaggio
Avvitate i gli “End Cap” ai “Rail” usate un pezzo di filamento, scaldando le estremità per non farlo uscire, per assemblare le cerniere.
Translate with Google.
Sorry, but my English is bad
Remix of Silicone Wire Spool Holder from Djambo to be able to change the spool without having to unscrew the screws.
Each spool is changed by lifting the top of the box.
For those who have already printed the original, it is necessary to print only the two parts of the box.
I used brim and support
Assembly
Screw the "End Caps" to the "Rails" use a piece of filament, heating the ends to keep it from coming out, to assemble the hinges.le the hinges.
Filament Prusa PLA Transparent
Infill 20%
Layer 0,2 mm