Phone Dashboard Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phone Dashboard Mount Ball Joint to goPro adhesive mounts - 17mm Ball joint, short version
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
17mm seems to be the default for many chargers using ball joints.
I have been am using the setup for two years now with no issues with the printed parts. Also the adhesive did not leave any residue on my dash.
I recommend printing in a Material with a higher melting temperature to prevent deformation during warmer days.
Depending on your climate you might want to support the mount by resting it on you dash as the adhesive eventually came loose with the additional leverage from slamming my phone into the mount on a hot day.
I used it for these phone mounts / chargers:
(Please excuse the German links ;) )
For assembly you need:
- M3x22 or longer
- M6x20 or longer
- M4 Nut