Umbrella Stroller Handle Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have found that the handles on my daughters umbrella stoller were just a bit too short to be comfortable so I made…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 852
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I have found that the handles on my daughters umbrella stoller were just a bit too short to be comfortable so I made extensions. I originally planned on using 1/2" pvc for the handles so the clamp is sized to allow that. However since I am using a cr-10 I was able to print handles that were long enough. I have been using the handles the last couple of days while on vacation and will probably be making a few changes from things I noticed but mainly just the handle design not the clamps.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
30
Notes:
I printed the clamps vertically and the handles on their side with rafts and sunk 2 mm into print bed. I also printed everything in PETG with 3 shells. I would think that the would be a little less flexible with PLA for the handles but I did not want to worry about them breaking.
Category: Replacement Parts