Umbrella Stroller Handle Extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have found that the handles on my daughters umbrella stoller were just a bit too short to be comfortable so I made…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 0
- Views
- 852
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I have found that the handles on my daughters umbrella stoller were just a bit too short to be comfortable so I made extensions. I originally planned on using 1/2" pvc for the handles so the clamp is sized to allow that. However since I am using a cr-10 I was able to print handles that were long enough. I have been using the handles the last couple of days while on vacation and will probably be making a few changes from things I noticed but mainly just the handle design not the clamps.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
30
Notes:
I printed the clamps vertically and the handles on their side with rafts and sunk 2 mm into print bed. I also printed everything in PETG with 3 shells. I would think that the would be a little less flexible with PLA for the handles but I did not want to worry about them breaking.
Category: Replacement Parts