Swivel for 4010 Part Cooling Blower SV01/03 BMG/Left Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do away with those part cooling ducts/shrouds. Just install a 4010 fan on this swivel and aim it at the tip of the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Do away with those part cooling ducts/shrouds. Just install a 4010 fan on this swivel and aim it at the tip of the nozzle. These Wathai fans are very quiet, and they come with the required 2.5 mm bolts and nuts. All you will need in addition to that is a M3x16 screw.
5/21/23: updated the swivel part and replaced it with a combined mount named 1x4010 part cooling for BMG-Left. Offset post kept for convenience in case your fan requires it.
6/3/23: added an optional duct. Remove offset post because not needed.
12/23/23: added new swivel design to accommodate a Volcano style hotend.
12/25/23: added 2nd swivel for dual 4010 part cooling; requires thing:6048779 to mount.
Category: 3D Printer Parts