Kitchen Sink Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A kitchen caddy with sink drainage to keep your wash tools tidy and dry. STEP files provided.
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 417
- Wydruki
- 2
- Wyświetlenia
- 2957
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Found some interesting ideas around and put them all together to suit my needs.
The holder edge is designed so you can heat it up (gently) and conform to your sink edge.
There's room for a soap dispenser (70 x 70 mm or 2,75" max unless resized) and a cleaning brush. There are also 2 slots (vertical and horizontal storage) for your scrubbing weapons of choice.
Two models are provided being the sole difference the spacers (higher with a hole carved or lower and simpler).
The bottom is designed with a slight slope to facilitate the water drainage. Published files should be ok, but there's no harm in re-checking your slicer keeps the whole base on the build plate.
Printed in PLA.
Update 24/04/03: Uploaded STEP files so you guys have an easier time customizing it if you want to.