Quick & Easy BlTouch Mount for a Kossel Mini E3D V6 Effector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and easy way to a BlTouch Mount to a Kossel Mini E3D V6 Effector for Delta printers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOT TESTED
A quick and easy way to add a BlTouch Z-probe to the Kossel Mini effector for E3D-v6 hotend with 40mm spacing between Traxxas rod ends. You need to print the modified clamp and the appropriate BlTouch spacer to get the correct distance above the nozzle. Includes a cable pass-through for the BlTouch wires as well as the other hotend wires.
I modified a BLTOUCH 3D WASHER to 9.0 mm in SketchUp; I have included various sizes (as indicated by the file name) in case your setup is different. The 9.0 mm spacer looks about right in my mock-up. The first set of numbers is the height in mm, the last number is just my design iteration (Example: blt_9.5_spacer_1.2.3 is 9.5 mm tall).
I have not printed this as I ended up modifying the effector instead, which can be found HERE: https://www.printables.com/model/472782-kossel-mini-e3d-v6-effector-with-bltouch-mount
If you like my designs and want to send me a tip, you can do so via PayPal….. Thank you and enjoy the models I create.