Car visor mount for Käuferle garage opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a car visor mount for a Käuferle garage opener. Its a tight fit with low tolerances. The mount…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 245
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is my take on a car visor mount for a Käuferle garage opener. Its a tight fit with low tolerances. The mount expects a visor with a thickness of about 19-19.5mm, this is the case with the Skoda Octavia 3 and I guess most cars from the VW universe.
V4 ist updated with a strengthened transition from the remote holder to the clamp, tighter clamp fit and little nobs to prevent sliding.
Can be printed upright without supports, recommend using a brim and 5 layers to make the thin parts, especially the clamp, more stable.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Prusament PLA Galaxy Black
Notes:
Can be printed upright without supports, recommend using a brim and 5 layers to make the thin parts, especially the clamp, more stable.
Category: Other