Car visor mount for Käuferle garage opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my take on a car visor mount for a Käuferle garage opener. Its a tight fit with low tolerances. The mount…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 46
- Makes
- 0
- Views
- 245
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is my take on a car visor mount for a Käuferle garage opener. Its a tight fit with low tolerances. The mount expects a visor with a thickness of about 19-19.5mm, this is the case with the Skoda Octavia 3 and I guess most cars from the VW universe.
V4 ist updated with a strengthened transition from the remote holder to the clamp, tighter clamp fit and little nobs to prevent sliding.
Can be printed upright without supports, recommend using a brim and 5 layers to make the thin parts, especially the clamp, more stable.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Prusament PLA Galaxy Black
Notes:
Can be printed upright without supports, recommend using a brim and 5 layers to make the thin parts, especially the clamp, more stable.
Category: Other