1:1 Balun w Choke
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This box holds a 1:1 balun and a choke, I used FT240s and a mix 61 for the 1:1 and a mix 31 for the choke as per the…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This box holds a 1:1 balun and a choke, I used FT240s and a mix 61 for the 1:1 and a mix 31 for the choke as per the Palomar website. https://palomar-engineers.com/ferrite-products/ferrite-cores/ferrite-mix-selection
I ran window line from the dipole down to the ground.
I know this looks like a 9:1 they are wound the same but are actually connected totally differently.
You wont have to worry about the infill as the walls are thin enough that with 3 perimeters you do not have to worry about infill.
Category: Electronics