FXT Viper Antenna Thumbscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The FXT Viper screen when mounted into the googles cannot use a standard SMA thumbscrew adapter as the goggle gets in…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The FXT Viper screen when mounted into the googles cannot use a standard SMA thumbscrew adapter as the goggle gets in the way so I designed these so you can easily get the antennas off and on.
I did a larger grip area for your normal antennas, then one with a shorter grip areas for when using a 90 degree SMA adapter.
It is a little bit of a tight fit on the SMA connector but I did that on purpose as I hate it when they slide around.
if they are too tight then adjust your in your slicer accordingly:
Slic3r 1.2.9: Print Settings → Advanced → Other → XY Compensation
Cura 15.06: Print Setup → Quality → Horizontal Expansion
Simplify3D 3.x: Other → Dimensional Adjustments → Horizontal size compensation
Category: R/C Vehicles