Core XY X Axis Switch Mount Plus Y End Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a end stop mod for TK Ward's Core XY Kit. With it you can use Y axis stock switch and home in the same way it…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a end stop mod for TK Ward's Core XY Kit. With it you can use Y axis stock switch and home in the same way it did with the stock FT5 setup. You will need to run the X axis switch wire with the other hotend wires. Small price to pay to get the homes the same!
Note: I have not set my FT5 up with this yet but there shouldn't be any issues that I can see.
UPDATE: 4-15-19. Edited the Y axis endstop on the full version. Will be fixing the small version shortly. Added a one piece pully mount for the other side. Seams to be stronger.
UPDATE: 4-15-19. Small Version fixed!
UPDATE: 4-14-19. Moved the screw hole closer to be center on the micro switch.
UPDATE: 4-14-19. Modeled a version for the batch that had only two holes on each end. Hope the holes line up. All I had to go on was the universal ends with four holes. After printing, drill holes out with a 13/64" drill. Someone let me know if it works please.
Link to TK Ward's Core XY Kit. https://www.facebook.com/groups/Folgertech3DPrintMods/permalink/407825643346538/
Print Settings
Printer:
Folger Tech FT-5
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
15%
Filament:
XZYTech PETGTransparent
Category: 3D Printer Parts