Prusa LACK Enclosure External LCD Mount 1.5mm higher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix makes it so the LCD controlbox sits 1.5mm higher to allow the LACK drawers to open (when also using the…
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 247
- Wydruki
- 7
- Wyświetlenia
- 2538
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This remix makes it so the LCD controlbox sits 1.5mm higher to allow the LACK drawers to open (when also using the drawer spacers).
Raising it by 1.5mm is enough to allow the drawers to open under the LCD controller, but still sits below the top of the LACK surface so that the acrylic doors don't hit the LCD controller.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.