Prusa Original Enclosure vent/exhaust adapter (Lack enclosure adapter also included.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exhaust adapter that fits to a 4inch hose. A.K.A. stinky out. (Lack enclosure model also included.)
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 942
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Adapter created to fit the hexagonal hole in the back of the Prusa Orginal Enclosure.
Exhaust adapter fits to a 4 inch exhaust hose for venting your print fumes to outside.
Fasteners: The holes fit any m3 screw/nut combo. I used 4 m3x20 screws alongside m3n nuts to secure the adapter to the enclosure.
The ones I used were the extras that came with the Prusa Original Enclosure/Mk3s+
Additionally I included the first iteration of this model that I initially created for the Ikea Lack Enclosure. It fits a 2-¼ inch hole that you can saw into the top of the Lack table, I just super glued the part to the top of the table.