Sprinkler Adapter 1/2" riser to 1/4" barb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Home Depot proposed a slew of adapters to go from 1/2" male to 1/4" male. This made more sense to me.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I needed misting head for shrubs and found https://www.homedepot.com/p/DIG-Fogger-Mister-on-Barb-5-Pack-7750BB/100143134 at Home Depot. The only solution they have to use this on a ½" threaded PVC is to use an adapter to a hose to the head. This is a direct adapter.
Specifically, the pipe end is a ½" NPT female thread, and the head end is female thread that matches the tiny threads on the sprinkler head.
OpenSCAD code is included, but you'll need this thread library (attached as well):
http://burningsmell.org/3d/lib/tsmthread/
http://burningsmell.org/3d/lib/tsmthread/tsmthread4.scad
I printed it on its side to put the layers perpendicular to the threads. That may have resulted in the amount of leaking I see through the threads…