Belt guide for belt tensioner (Sparco Q-Grid)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed and lightly modified the belt tensioner to have more clearance in the roll through hole and have the…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 835
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I remixed and lightly modified the belt tensioner to have more clearance in the roll through hole and have the mounting screws going through the full support body for more resitance.
I am pretty sure the original design works perfectly fine but as it takes some time to print the few components i preferred to overkill it a bit.
You will need M4 countersunk screws 30mm long, the rest is exactly as the original design https://www.thingiverse.com/thing:4944378 (thank you @darumble for the design)
Print Settings
Printer Brand:
Anycubic
Printer:
Large Size Chiron
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
most components need support to the touching table
Category: DIY