Fuse-Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuse-Box for 5 fuse holders. Used for relays-shield for Arduino or similar.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This box carries five fuse holders. Diameter 12mm.
I designed it for my Arduino and esp projects. I often use relays shields to control loads up to 230V~
The most relays are not able to switch 16A - like e regular fuse in my installation allows. So its necessary to include a fuse that protects the shield from overloads in case of failure.
This box must be installed in additional housings and is only suitable for dry environments.
Additionally needed 6 screws M3x10.
The box can be mounted on a plate (or where ever) from below with M3 screws.
Notice: Electrical installations in the mains voltage area may only be carried out by electricians!