Fuse-Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fuse-Box for 5 fuse holders. Used for relays-shield for Arduino or similar.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This box carries five fuse holders. Diameter 12mm.
I designed it for my Arduino and esp projects. I often use relays shields to control loads up to 230V~
The most relays are not able to switch 16A - like e regular fuse in my installation allows. So its necessary to include a fuse that protects the shield from overloads in case of failure.
This box must be installed in additional housings and is only suitable for dry environments.
Additionally needed 6 screws M3x10.
The box can be mounted on a plate (or where ever) from below with M3 screws.
Notice: Electrical installations in the mains voltage area may only be carried out by electricians!