Groove Mount / V6 Adapter for Anycubic Kobra Max
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two adapters with 5mm of offset between them, fixated with short M2.5 screws and mounted with long-ish m2 screws
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 573
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- GNU General Public License v2.0
WIP of a Korba Max mod. I abandoned it over cooling issues but the parts uploaded did fit when tested on my machine
The long version positions a mellow v6 hotends nozzle were the stock nozzle would be.
My presliced gcode got flagged as corrupt, so I had to zip it. I dont think theres anything wrong with it but use it at your own perril.
(These settings might seem a little extreme, but you can print this with a normal 0.4 nozzle)
line width of ≤0.276
layer height of ≤0.8
exclusive slicing mode (volume calculation)
Supports: none needed
get it as close to 100% solid as you can with your material
Recommend:
Have the screws bite into their slot at least once before you fully assemble.
Formfutura tough Pla,or something better
A small pipe wrench to help press the halves together
Cheap screws I used https://www.amazon.de/-/en/gp/product/B08CXDXYJY
Cheap allen keys I used https://www.amazon.de/dp/B088MDTTL4