Groove Mount / V6 Adapter for Anycubic Kobra Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two adapters with 5mm of offset between them, fixated with short M2.5 screws and mounted with long-ish m2 screws
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 86
- Makes
- 0
- Views
- 573
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- GNU General Public License v2.0
WIP of a Korba Max mod. I abandoned it over cooling issues but the parts uploaded did fit when tested on my machine
The long version positions a mellow v6 hotends nozzle were the stock nozzle would be.
My presliced gcode got flagged as corrupt, so I had to zip it. I dont think theres anything wrong with it but use it at your own perril.
(These settings might seem a little extreme, but you can print this with a normal 0.4 nozzle)
line width of ≤0.276
layer height of ≤0.8
exclusive slicing mode (volume calculation)
Supports: none needed
get it as close to 100% solid as you can with your material
Recommend:
Have the screws bite into their slot at least once before you fully assemble.
Formfutura tough Pla,or something better
A small pipe wrench to help press the halves together
Cheap screws I used https://www.amazon.de/-/en/gp/product/B08CXDXYJY
Cheap allen keys I used https://www.amazon.de/dp/B088MDTTL4