1 / 2
openDTU / Ahoy with ESP-32S and NRF24L01+ Housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
openDTU / Ahoy Housing for ESP32 + NRF24L01+ Module
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 164
- Wydruki
- 3
- Wyświetlenia
- 1421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (11)Powiązane
Pressfit Housing for openDTU / ahoyDTU Datalogger.
Made this to the smallest factor that makes sense.
Used following Components to build:
- ESP-32S (used one from this set)
- NRF24L01+ (used one from this set)
- 6EA of the smallest Jumper Cable from this Set
Build:
- Print Out Housing and Cover
- Connect ESP32 with the NRF24L01+ Module acc. openDTU Schematic
- Roll Jumper Cables and rest the NRF Module inside the Housing as seen on Picture.
- Press on the Cover
- Plug in to USB Power
- (Optional) Mount on desired place with a Screw