1 / 2
6in Duct to Phanteks P400A Top Radiator Fan Grille Vent Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits into the indent for the top radiator/fan grille of a Phanteks P400A and adapts to 6" duct.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 740
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Print two.
A hose clamp will hold them together, so the seam only needs glue or tape to seal.
Fitting the duct on is very snug.
Made with 0.4mm increments in mind for 0.4mm layer heights.