1 / 3
Slice Mosquito / Bond Tech LGX 5015 Cooling Fan Duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added a 5015 fan to mosquito
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to improve cooling of my Mosquito heat break by installing a 5015 fan and duct over the existing 25 mm fan. I mounted the fan higher to access cooler air above the doors on my core XY printer. The Model requires a 5015 Fan, two 2.5 mm X 25 mm cap head screws and two 3mm X 10 mm cap head screws.
Printed in PETG
.3 mm Layer height
Supports from bed only
This mod cooled my heat break by 10 Degrees Fahrenheit. Allowing me to increase my retraction and print faster.