1 / 1
Case for 4-way ESP relay with 12V outputs and sensor port. — zdjęcie 1

Case for 4-way ESP relay with 12V outputs and sensor port.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple case with only the necessary output and input holes to protect the electronics

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
245
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

This is a case I designed for [1], which I flashed with ESPHome to control the water pumps that irrigate the plants in my balcony. It provides 4 holes for 12-volt round connectors (to control the pumps and the balcony light) and another one for an input, connected to a water level sensor.

[1] https://www.aliexpress.com/item/1005001501100301.

Tagi