Poker - ALL IN Button - integrated magnetic stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ALL IN Button for all the poker players out there. If not needed in game, can also be used as fidget toy ;-)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Poker ALL IN Button with integrated rotatable stand.
Two small magnets can be added to secure stand in closed position and use it as a kind of fidget toy.
Because I am not into MMU or changing filaments during printing, the button consists of three printed parts which need to be glued:
- Base (print-in-place stand included) → no support
- Mid-part → support recommended
- Top → no support
I used 0,2mm layer height on my MK3S and it worked out pretty fine.
IMPORTANT: After printing the base part and before rotating the standing: make sure to loosen up the hinged stand by pushing and jiggling in these spots:
If the stand is not loose, chances are high that the small tube inside will break when trying to rotate it.
The magnets (diameter = 5mm, height= 1mm) are inserted in the base part:
First one just pushed into the marked slot, second one needs to be glued in circular embossment of the stand.
Happy printing and good luck for your next poker night!