Poker - ALL IN Button - integrated magnetic stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ALL IN Button for all the poker players out there. If not needed in game, can also be used as fidget toy ;-)
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 84
- Makes
- 0
- Views
- 521
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Poker ALL IN Button with integrated rotatable stand.
Two small magnets can be added to secure stand in closed position and use it as a kind of fidget toy.
Because I am not into MMU or changing filaments during printing, the button consists of three printed parts which need to be glued:
- Base (print-in-place stand included) → no support
- Mid-part → support recommended
- Top → no support
I used 0,2mm layer height on my MK3S and it worked out pretty fine.
IMPORTANT: After printing the base part and before rotating the standing: make sure to loosen up the hinged stand by pushing and jiggling in these spots:
If the stand is not loose, chances are high that the small tube inside will break when trying to rotate it.
The magnets (diameter = 5mm, height= 1mm) are inserted in the base part:
First one just pushed into the marked slot, second one needs to be glued in circular embossment of the stand.
Happy printing and good luck for your next poker night!