Loft Ladder Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 563
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
The loft ladder is quite old and the manufacturers label has long since gone.
I think it was made by ABRU. There are four clip-on plastic caps covering the sharp ends of the aluminium sections.
(The top section also has plastic caps, they are slightly longer than the ones for the lower sections. I need to make two more to fit that later.)
I made the cap look similar to the original apart from increasing the thickness to improve strength.
I used PETG for durability and flexibility.
Print instructions
Category: Replacement Parts Summary
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
The loft ladder is quite old and the manufacturers label has long since gone.
I think it was made by ABRU. There are four clip-on plastic caps covering the sharp ends of the aluminium sections.
(The top section also has plastic caps, they are slightly longer than the ones for the lower sections. I need to make two more to fit that later.)
I made the cap look similar to the original apart from increasing the thickness to improve strength.
I used PETG for durability and flexibility.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
</div>Rafts:No
Supports:
No
</div>