Loft Ladder Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 80
- Makes
- 0
- Views
- 563
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
The loft ladder is quite old and the manufacturers label has long since gone.
I think it was made by ABRU. There are four clip-on plastic caps covering the sharp ends of the aluminium sections.
(The top section also has plastic caps, they are slightly longer than the ones for the lower sections. I need to make two more to fit that later.)
I made the cap look similar to the original apart from increasing the thickness to improve strength.
I used PETG for durability and flexibility.
Print instructions
Category: Replacement Parts Summary
This is to replace broken plastic end caps on the tops of the lower two sections of a three-section loft ladder.
The loft ladder is quite old and the manufacturers label has long since gone.
I think it was made by ABRU. There are four clip-on plastic caps covering the sharp ends of the aluminium sections.
(The top section also has plastic caps, they are slightly longer than the ones for the lower sections. I need to make two more to fit that later.)
I made the cap look similar to the original apart from increasing the thickness to improve strength.
I used PETG for durability and flexibility.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
</div>Rafts:No
Supports:
No
</div>