1 / 2
Electric fence / bungee tape / tape gate insulator handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle to isolate an electric fence from anything it might connect to
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (39)Powiązane
Used for break fencing paddocks when connecting a “hot” electric wire to a inert wire. This isolates the live wire from whatever you connect it to (usually a non live wire).
| Print Settings | Setting |
| Walls | 2 (min) |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | Asa - you can use anything but its life will be less in the sun than Asa |
| Infill | 15% |
| Supports | None |
| Other | I recommend more walls if you put a lot of tension on these |