Home Gardening Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Home Gardening Tower for a clean and compact home garden. You can plant 4 or much more plants with this one Tower.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 566
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Home Gardening Tower for a clean and compact home garden. You can plant 4 or much more plants with this one Tower.
Tower does NOT require any supports or brims.
Additional items for the Build:
Submergible water pump
Water hose
DESIGN UPDATE ON 24th of May:
The watering insert was not distributing water on all planters equally so I made 2 new versions for testing. They take the same amount of time to print and have similar filament usage. It is called Sprinkler now. I have deleted the old one.
Adding a new Plant Holder for holding 6 plants
Adding hose extension part (for hose 12x10mm)
DESIGN UPDATE ON 25th of May:
Sprinkler v2 is now updated. The hose hole is a somewhat bigger and nicer slope for water drainage. It is now v2.1.
The plant holder for 4 plants is now removed since 6 plants holder is much more practical.
Sprinkler v1 is now removed since the new v2.1 is much easier to print and it is distributing water much better.
DESIGN UPDATE ON 27th of May:
- The stand/Water Tank part was redesigned to serve the same purpose but to print faster and to use less filament.
THIS IS NOW A FULLY TESTED AND WORKING MODEL
Printing Settings:
Testing Printer: NEPTUNE 3 PRO
Testing Filament: Devil Design Violet PLA
Layer Height: 0.28
Parameters: 3
Infill: 10% (Cubic)
Supports: No
Brims: No
Print Time: ~25h50m
Filament Usage: ~560g