Planter pot adapter - 10" into 11x11"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to drop a 10" round planter pot into an 11x11" square pedestal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter to drop a 10" round planter pot into an 11x11" square pedestal. Without this support the pot is too small to grab the edges of the pedestal and will fall in.
The round flower pot is a typical garden center hanging planter. The pedestal is something you would find at home depot. These appear to be common sizes.
I printed this in PLA (thought PETG will surely survive the elements longer.)
- 0.2 or greater layer height. I tried 0.2, 0.24 and 0.28. All were fine.
- No supports
- 10% cubic infill
The design includes gaps to reduce filament usage. It is likely still over-built but it holds the planter without issue.