1 / 1
3 Piece Body Panels for Drag Racer — zdjęcie 1

3 Piece Body Panels for Drag Racer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For the RMRRF Drag Racer

Ocena
0 / 5
Polubienia
7
Pobrania
39
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of the body panels from this model. 

I am still printing this and waiting on my magnets so technically this is untested, but i see no reason it shouldn't work. Will update after i get it on my car.

I modded the original side panels to be in 3 pieces instead of one. This will allow you to print logos and designs into all sides easily. So far i have only modded the largest body panel but I intend to mod the medium one at some point too. I don't current intend on converting the smallest body panel as i think it is adding strength to the nose.

This mod adds 6 additional 6x3mm magnets.

 

UPDATE 060323: So i finally printed out the whole set a realized the holes in the top for the magnets were not deep enough…here is a new top.

Tagi