1 / 4
Decorative Imitation Steel Plates with Exposed Bolts — zdjęcie 1
1 / 4

Decorative Imitation Steel Plates with Exposed Bolts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are modeled after the industrial steel brackets used on the ski maps at Vail.

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

I went on a ski trip and decided I wanted to make an industrial looking frame for my projection screen. It's inspired by the ski map brackets in Vail.

They're not strong on their own but they did hold my 3.5 inch trim boards together while I fastened them to the wall.

#6 wood screws fit perfectly in the countersunk holes.

You can fill the holes with the plugs if you want a cleaner look. The hole plugs are 4 different sizes. I didn't end up using them on mine but the 2nd smallest one was a snug fit for me. 

The glue in bolts fit into a 3/8 inch hole.

I combined the elbow and a single bolt plate to make T brackets. A full T bracket this size wont fit on an MK3.

I had a little corner warping on mine so I've also included a version with corner anchors.

 

Tagi