1 / 4
Decorative Imitation Steel Plates with Exposed Bolts — image 1
1 / 4

Decorative Imitation Steel Plates with Exposed Bolts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are modeled after the industrial steel brackets used on the ski maps at Vail.

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
137
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Public Domain

I went on a ski trip and decided I wanted to make an industrial looking frame for my projection screen. It's inspired by the ski map brackets in Vail.

They're not strong on their own but they did hold my 3.5 inch trim boards together while I fastened them to the wall.

#6 wood screws fit perfectly in the countersunk holes.

You can fill the holes with the plugs if you want a cleaner look. The hole plugs are 4 different sizes. I didn't end up using them on mine but the 2nd smallest one was a snug fit for me. 

The glue in bolts fit into a 3/8 inch hole.

I combined the elbow and a single bolt plate to make T brackets. A full T bracket this size wont fit on an MK3.

I had a little corner warping on mine so I've also included a version with corner anchors.

 

Tags