MKS Robin Mini To SKR 1.3 or 1.4 adapter (not just for) Kingroon KP3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter to replace your MKS Robin Mini with an SKR 1.3 or similar board
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 920
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Since the extruder stepper motor driver has died on my MKS Robin Mini, I decided to swap it for an SKR 1.3, which I had at home. I made this adapter, so the microSD card slot is at the same place as on the Robin. Luckily, the USB port also lined up.
I made a special version for the Kingroon KP3 printer, where the mounting tabs of the electronics cover would be in place.
Assembly instructions: all nuts are regular M3 nuts, and are press fit. Secure the SKR board to the adapter with M3x8 screws with a washer underneath. Then (at least in the case of the KP3) secure the adapter to the baseplate with M3x12 screws.
Printed mine from Devil Design PETG Black
As far as my experience goes, should be compatible with the SKR 1.3, SKR 1.4 and MKS Gen L boards, maybe even more.