Miniature Painting Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature Painting Handle with an extended arm for painting in all directions.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 568
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
My old DIY handle made from a soda bottle broke so I designed this to replace it based on my original. I use wall gum/tac adhesive but I left a hole for placing a magnet as well if that's your preferred attaching method.
Printing
no supports, 20% infill, PLA, no brim, 0.2 height
Assembly
The cap is hard to attach to the base so I recommend placing it on the floor and stepping on it. The additional rings around the base are for stability, you need to insert the cap fully. The arm can be glued or friction fitted, I didn't use glue so I can change the arms.
Let me know if you want some custom arms.