Fixation for magnet board "blomus MURO"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.
But there is only one drawback:
The board is mounted with 2 screws on the top only.
Pushing away a strong magnet lifts the bottom of the board from the wall.
So I decided to design a locker to fix it on the bottom side as well. It should be an aesthetic (means: invisible) solution.
The designed fixation is mounted behind the board and can be opened and closed with a screwdriver. When printed with black material, it is almost invisible.
My boards are 40x80cm. I assume that the fixation may work for other sizes as well. But obviously only for the perforated ones.
Needed material:
- 2x screws 4 x 50mm
- 2x wall plug 6mm
History
Version 0.1.0
*First published version and currently in use.
Print instructions
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3mm
Infill: 100%
Filament: PLA is fine