Fixation for magnet board "blomus MURO"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Appreciating the design of the perforated stainless steel magnet board from blomus I use them in my office at home.
But there is only one drawback:
The board is mounted with 2 screws on the top only.
Pushing away a strong magnet lifts the bottom of the board from the wall.
So I decided to design a locker to fix it on the bottom side as well. It should be an aesthetic (means: invisible) solution.
The designed fixation is mounted behind the board and can be opened and closed with a screwdriver. When printed with black material, it is almost invisible.
My boards are 40x80cm. I assume that the fixation may work for other sizes as well. But obviously only for the perforated ones.
Needed material:
- 2x screws 4 x 50mm
- 2x wall plug 6mm
History
Version 0.1.0
*First published version and currently in use.
Print instructions
Rafts: Doesn't Matter
Supports: No
Resolution: 0.3mm
Infill: 100%
Filament: PLA is fine