Voron 2.4 Revo Nozzle Skirt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Netpackrat's magnetic closure Revo nozzle skirt, with Hartk-style skirt slots for 300mm size Voron 2.4
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 1468
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Huge shoutout to everyone that has worked on and been the inspiration for this part. Thank you to Netpackrat for remixing Daten's original Revo nozzle skirt to add magnetic closures, and then accommodating my request to design around 6x3mm magnets. Thank you to Hartk for the awesome Voron 2.4 skirt design with slots, and to Stitch as well for making the 300mm skirts.
I remixed Netpackrat's design to match the Hartk-style skirts with slots. Netpackrat's remix uses a piece of scrap filament as the hinge, and I found that trimming the filament to a point helped with installation.
Print recommendations:
- 0.4mm nozzle
- Standard Voron part settings
Build requirements:
- 1 piece of scrap filament
- 2 6x3mm magnets (press fit)
UPDATE 23/06/20
A few folks have mentioned an interest in these skirts in 250mm and 350mm sizes. I am currently working to make versions for these printers. Please check back regularly if you are interested in either 250 or 350 nozzle skirts!