1 / 6
SG90 Form Factor Potentiometer.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Potentiometer in the form factor of an SG90 servo
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 438
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This model is inspired by https://www.thingiverse.com/thing:2416859 I have included my source code.
I made several modifications to this to make it easier to print and build.
- The rear cap is a separate component
- The shaft is printed sideways for strength
- The channel for the potentiometer has been opened at the corners
- The size has been confirmed against a real SG90 servo
- The shaft is keyed with a 3d printed D, this means that it will not work with SG90 horns, but I have also re-created all the horn types that come with an SG90
- Support material is built in.
This is used with 10k ohm potentiometers such as
https://aliexpress.com/item/1005004562155289.html
https://aliexpress.com/item/1005001631972461.html
The hole for the shaft is intended to be drilled out with a 13/64 inch or 5.2mm drill bit.
The rear cap is held on with a 3mmx14mm screw for wood or plastic.
The horn is held on with a 2mmx9mm wood screw.