Voron Stealthburner EBB36 Shield, Umbilical Strain Relief and Fan Mount (Support Free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This shields the back of the EBB36 board for the Voron Stealthburner, as well adds a mount for a 4010 fan
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 2120
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A simple variant of the Stealthburner door which is extended and has a back shield to protect the EBB36 wires and electronics. Also sports 4010 fan mount for cooling the stepper motor drivers and MCU which is especially useful for use in a heated enclosure.
For the fan mount, you will need 4x M3 heatset inserts.
Note, this model is designed for the umbilical mount. It will extend past the back of the Voron carriage a little, so you should use a low profile umbilical adapter to prevent it from colliding with the back of the gantry. This is the one I used
https://www.printables.com/model/345529-voron-24r2-a-drive-pg7-umbilical-mount-remix
This model also uses the EBB36 mounting plate from
https://www.printables.com/model/354200-voron-stealthburner-with-cw2-door-and-mount-for-bt/files
If you've found this model useful, feel free to tip me a buck or 2
https://ko-fi.com/henryj