SlipCase for Raspberry Pi 4b and Noctua 40x10mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap together no screws, fits Raspberry Pi 4b and Noctua 40x10 mm fan. Cool and Quiet.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 110
- Wydruki
- 3
- Wyświetlenia
- 680
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SlipCase-FanCase is a snap-together Pi4B Case and stand for the 40mm Noctua Fan
IOPlane snaps over IO, used as slide/guide for Pi4B and Fan Assy to slide into Base, carefully snap on cap.
Noctua 40mm fan fits into Fan frame
Fan support with 10mm CPU to Fanblade (8.5mm to frame other chips)
I place heatsinks on chips and run fan in the following configuration…
Wiring: Warning!
Follow these instructions at your own risk… not an EE… not tested fully (Ubuntu Server only)
I wire the Noctua 5V, 4 wire PWM 40x40x10 fan directly to (Pins 4, 6, 12, and 18).
https://forum.duet3d.com/assets/uploads/files/1600366047069-gpio-pi4.png
Red wire to 5V (4)
Black wire to ground (6)
Blue wire for PWM to GPIO18. (12). (NOTE : Edit python script (lines 13 and 14)
Green wire for RPM to GPIO24. (18)
Python script (FanProportional.py) from Michael Klements
https://www.the-diy-life.com/connecting-a-pwm-fan-to-a-raspberry-pi/
Stress Test: ~62C peak … 46C idle
https://core-electronics.com.au/guides/stress-testing-your-raspberry-pi/