Minimalistic SD-Card Holder-Keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Minimalistic Semi-PiP take on a SD-card keychain-holder. The card fits snugly inside and should not rattle!
- Ocena
- 4,5 / 5
- Polubienia
- 25
- Pobrania
- 189
- Wydruki
- 3
- Wyświetlenia
- 910
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is my first ever published mode, so every bit of feedback is embraced!
The holder consist of two parts- the holder and the tray. Tolerances in between the parts have been made to work for even the worst prints.
I suggest printing at a lower layer height, (eg. 0.16mm) if possible. This way the latch that keeps the pieces together is more smooth and won't “jam” so much. I have tried with 0.16mm and 0.2mm layer heights and can feel a bit of a difference, but overall it holds together either way, so you won't lose you precious card and it's contents!