Rugged Filament Dry Box for over 200g silica gel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another filament dry box. This one has a big tray for over 200g silica gel.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 346
- Wydruki
- 2
- Wyświetlenia
- 2505
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
You need:
6 M3x30 screws
4 608 ball bearings
1 PC4-M10 quick fitting connector
1 rectangular hygrometer (the cheap one)
a bit of PTFE tube
The tray has to be printed in a flexible material, e.g. PETG, the seal needs to be very flexible (TPE/TPU), for the other parts PLA is okay.
All parts printed with .4-nozzle, .2 layer height, no supports. The bars have to be printed with 10 walls or 100% concentric infill.
I used hot glue to fix the hygrometer to get it airtight.