1 / 3
Sovol SV06 Top Gantry Shim for Auto-Z Levelling — zdjęcie 1
1 / 3

Sovol SV06 Top Gantry Shim for Auto-Z Levelling

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Many SV06's come with a warped top bar. These shims insert into the gap in the injection molded top bar.

Ocena
5 / 5
Polubienia
16
Pobrania
68
Wydruki
1
Wyświetlenia
1018
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is NOT a definitive fix, but for me I was fighting the ABL, I even tried using a timing belt like on my Ender, but it stopped working for some reason (machine spirits I guess) - this could be a good fix for you if you haven't tried it yet. 

How to use:

  • Get your bed mesh from Octoprint/Klipper, then see how much slope your auto z-align is producing. For me I had 0.544 mm of variance, so I picked shims from 0.3 to 0.54 mm.
  • Print the shim(s) that you want to test, preferably on another printer that is better tuned if you can.
  • Make sure to have the shim the right way around, and press it into the gantry.
  • Set up auto bed levelling as usual with SV06, and see if the mesh has improved. If not try other shims of different heights, or find some other method to help with your SV06's levelling issues. My outcome isn't amazing but I'm planning on using x-twist compensation to see if I can alleviate other issues.

Printed in PETG as I found PLA breaks easily at these thicknesses when trying to remove a shim from the top of the gantry (I even tried it with a longer top part and it was harder to insert and remove).

Make sure everything else is square, and the printer you're using is calibrated well for these. If you've still got some issues, install some custom firmware that helps with x-twist (like hillsoft). I also recommend printing in black if you want it to blend in. Feel free recommend some more heights, or edit the STEP file yourself. I found that if the part of the model that goes into the gantry was too high, that it would be hard to remove, you might have a different experience.

Tagi