Smol Mantis VoronTap + Orbiter Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Voron original CW2 VoronTap compatible Smol Mantis tool head + Orbiter2.0
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1745
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Voron CW2 VoronTap compatible Smol Mantis tool head
Although it is a cw2 compatible head, but extruder uses orbiter 2.0
Because all my printers use orbiter2.0…👍
Due to the lower motor position of the orbiter extruder, the shape of VoronTap's pcb upper has changed very little.
Exactly compatible with the original Vorontap👌
As a result of using it for a while, I was able to get a little better cooling and a lot lighter than the Stealth Burner.
It is not easy to assemble, so please read the manual when assembling.
BOM is almost the same as smol mantis
Additional parts needed
m3-12mm shcs bolt x 2 for CW2 upper Hole(Orbiter Adapter)
m3-25~30mm shcs bolt x2 + Heat Set Inserts x2 for Orbiter Extruder
m3-8mm shcs bolt x2 for CW2 lower Hole
The explanation may be strange using a translator, I'm sorry🥲