Zipper Pull - Soot Sprite (Susuwatari)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boring zippers no more! Expanding the Zipper Pull collection - a dose of Ghibli magic. 🪄
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 2245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Items you need:
- 2 x “4mm x 30cm” paracord.
- *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power).
- *2 x “12mm” wiggly eyes.
- Super glue (for the eyes and magnets).
*If you do not have wiggly eyes and magnets, I have included a 3D printed option - Eyes (black and white part) & a Connector.
Suggested print settings for the Main Body:
- Layer height 0.2mm.
- Infill 30%.
- Position the print in a way that the joining face is facing downwards.
- No supports are needed.
- Selected areas require a fuzzy feature in PrusaSlicer (please refer to the attached 3MF files for guidance).
For more interesting zipper pull charms, be sure to track this tag (Zipperrific).
We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals! 🌟
NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.