1 / 4
Magnetic IKEA Shoe Horn Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shoe Horn Holder to keep your IKEA metal shoe horn on the wall.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (1)Kolekcje (13)Powiązane
My shoehorn had no place to be. So I designed this little holder.
It keeps the Shoehorn firmly on the wall with the help of 2 10x10x10mm magnets. So it only works with metal shoehorns.
I printed it with FLEX 98a, but it should also work with PLA.
I mounted it with a slightly overdimensioned screw on the wall. It should also work with Tesa Powerstrips. If you need changes on the model, just contact me.
https://cad.onshape.com/documents/7e291d9be845622356dec391/w/7bfd2865368b459472b753f4/e/9cb2e9e5cb7b5379961bf4b3