PiggyCam: 2020 Mount for Wyze Cam v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slim way to mount a Wyze Cam v3 onto a 2020 extrusion. Looks a bit like an angry pig ;) Great for Voron.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 464
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A slim mount for your Wyze Cam v3 on a 2020 extrusion. I'm using it on the back extrusion of the gantry on my Voron 2.4, so the gantry moves with the camera.
You will need to disassemble your camera, see this video for instructions as well as a handy way to adjust the focus. (You don't need the focus knob, as the lens will be sticking out of the case and adjustable without it!) You'll need to remove everything from the main board, including the IR board. Also detach the IRCUT cable, as it won't fit in the mount.
Remove the USB cable from the original case. The pin header will plug directly into the back of the camera's main board, through a hole in the back of the case.
The camera's main board and the front of the mount both screw to the back with 3 * M2x10 self-tapping screws. The mount attaches to the extrusion with an M3 T-nut and an M3x8 screw.
Unfortunately, you will need to mount the back on the extrusion before installing the camera and the front.
If you want to take timelapses, Wyze-Bridge provides a “snapshot URL” that you can feed into your timelapse software.
I printed this in PolyMaker ASA to stand the internal temperatures of my enclosure, but other filaments would likely also work fine depending on your application. For the back, supports are needed underneath the parts that stick into the extrusion, but nothing else.
